BT-410 Set

Robotis BT-410 package: master and slave together

The BT-410 Bluetooth Package combines a master module and one BT-410 slave module to facilitate contactless data transmission via serial UART communication.

Install the BT-410 slave module on your robot and the master module on the RC-100B wireless remote control . The cable provided with the set allows you to quickly make the necessary connection.

The two modules are very easy to pair: place them less than 10 cm apart.

Pairing is done automatically with BT-410 modules.

What applications for the BT-410 set?

The BT-410 set from Robotis allows for different configurations:

• The pairing of the master module with its slave module. In this case, you will not have to configure 2 different IP addresses;
• Data transfer between the slave module and a compatible cell phone (iOs or Android) ;
• The communication between the slave module and a PC. However, you will need to purchase the BT-410 dongle , a USB key that can be connected directly to your computer.

Technical specifications of the BT-410 Robotis kit

• Bluetooth Specifications: Support Low Energy 4.0
• Range: 10 m
• Band frequency: 2.4 GHz ISM
• Bandwidth: 128 kbps max
• Default transmission rate: 57,600 bps
• Operating voltage: 3.3 V
• Current consumption: 7 mA max
• Operating temperature: 0-40°C approx.
• Transmission rate: 1200 to 1,000,000 bps
• Single chip antenna
• Interface: UART (3.3 V)
• Sensitivity: -81 dBm (typical)
• Conducted network power: about -6 to 4 dBm (class 2)
• Weight: 4.5 g
• Dimensions: 18 x 30 x 9.1 mm